Latest Information

Latest news or the MOST important information!

Bending Plate Scale - ZCS-30B


This bending plate of ZCS series is made of special steel. The bending plate has two upstanding beams to construct a strong boundary condition. When the vehicle drives through the effective areas of the bending plate, strain gauges installed will react to the shape change of the bending plate, which then can output an electronic signal for instruments to calculate the weight of the vehicle and to display it.

Primary technical features

1. For reliability and long-term stability, the bending plate is used with better structure than other load pad scale.
2. With strain gauges working in -40℃~120℃, and sulfured rubber sealed, bending plate can work in various temperature environments.
3. Our advanced manufacturing technique ensures that bending plate static precision can be less than 0.5%.
4. Compared with the traditional weighing pad, the bending plate has longer demission in the driving direction, which ensures a much higher accuracy in dynamic weighing.
5. No load cell is used, which greatly reduces both the structure complexity and the failure rate.
6. The bending plate is with so low profile as to reduce both easier installation and less damage to the road surface.

Technical parameters


1. Vehicle overload detection under high speed velocity
2. Vehicle high speed velocity detection
3. Dynamic vehicle weighing of weight-toll system in highway
4. Vehicle weighing at port or bridge.